Home  › Glass railings

GLASS RAILINGS ENSURING MORE LIGHT AND TRANSPARENCY

Simply glass | Glass railings - System MetallArt

Glass railings guarantee maximum transparency. System profiles constituting the supporting structure to  accomodate the glass panes can be designed in steel, stainless steel or aluminium (powder-coated or anodised). At the top the glass railings are usually bordered by handrails made of stainless steel round tubes or wood. To increase the filigree and discreet character of the balustrade the handrails can also be realised with filigree U-channel sections. The construction can thus be reduced to its essentials.

Glass parapets / railings according to DIN 18008

Glass railings must comply with the legal regulations of the German building authorities according to DIN 18008 (former TRAV = Technical rules for fall protection glazing). The beam load, regulated in the stairs-DIN 18065 is 0,5 kN/lfdm (running metres) for residential buildings. In public buildings the beam load amounts 1,0 kN/lfdm (running metre). Depending on the categorie A, B or C the beam load for the handrail is taken up by the railing posts or by the glass panels themselves. This has an impact on the type and thickness of the glass to be used for the all-glass railing. 

Are you an architect or planner? We appreciate your individual request!

All-glass railing in Luxembourg

The all-glass railing in the commercial building Bâtiment Eagle in Luxembourg is a real eye-catcher. It completes the rounded concrete stairs as well as the gallery and, at the same time, the all-glass railing reflects the latest architectural trend....

more >>

Daimler Benz in Stuttgart/Sindelfingen

The flamboyant structure of the steel stairs presents itself like a sculpture in the foyer of the customer center at the Mercedes Benz factory in Stuttgart/Sindelfingen. The glass railing which is inserted in the box-type stringers juts out freely...

more >>

Curved glass railings for spiral stairs

 

In the foyer of the Inter health insurance company in Mannheim, innovative craftsmanship is appealingly combined with a prestigious design. The curved glass railings on both sides of the impressive spiral stairs look as if they jut out freely from...

more >>

Stairs with glass railings in the foyer of the KfW Bank in Frankfurt

The spiral stairs with curved glass railings in the foyer of the KfW Bank in Frankfurt combine design and aesthetic demands with technical and functional requirements. With an underside soffit of varnished steel sheet matched to the stairs flight...

more >>

Glass railing in the Prediger light shop in Hamburg

With a curved glass railing and a curved underside soffit, the spiral staircase in the Prediger light shop in Hamburg is a perfect example of innovative stair architecture. A glass railing must comply with the currently applicable regulations of the...

more >>

Steel stairs with all-glass railings | DSV Krefeld

 

The impressive stairs with all-glass railings in the corporate building of the global transport and logistics services provider DSV in Krefeld reaches over three storeys. The panels for the all-glass railings reinforce the impression of an open and...

more >>

Highlights of modern staircase construction

In modern architecture cantilevered stairs set new standards. The tread steps of cantilevered stairs seem to jut out freely from the wall which results in a highly impressive effect. There is also a supporting structure needed for cantilevered...

more >>

Filigree stainless steel profile for glass railing

Appropriate possibilities to demonstrate new machines, additional space and better comfort for the employees: These were the main reasons why the company Rehm Thermal Systems, located in Blaubeuren-Seißen, invested in a new building of more than...

more >>

Glass railing and parapet-high stringer

The modern staircase designed for the owners of this stylish private home convinces by the perfect mix of steel, glass and wood. With an external all-glass railing and a parapet-high steel stringer along the inner flight of stairs this staircase...

more >>

Glass Railings as Design Elements for Stairs

In discreet white, the stairs are stylish and captivating with a helical glass railing and a gracefully curved underside soffit at the Funky offices in Munich. This prestigious staircase project with an outstanding design satisfies highest technical...

more >>

The Building as a Helix | EMBL Heidelberg

During the planning of the new conference centre for the EMBL (European Molecular Biology Laboratory) in Heidelberg there was the idea to design the building as a helix. But finally, the mentor of this ambitious and challenging construction project, ...

more >>

Glass railings for Engelbert Strauss in Biebergemünd

With a new and representative office building the leading manufacturer of workwear and protective clothing, engelbert strauss, expanded its head quarters in Biebergemünd. In spring 2015 the premises were completed. The transparent glass railings...

more >>

All-glass railings & box-type stringer stairs | BOA VISTA Hamburg

The BOA VISTA is an impressive and prestigious office and apartment complex which is situated in the Portuguese quarter in Hamburg. In Portuguese this expression means something like "beautiful view" - indeed an appropriate name for a building...

more >>

Steel stairs | WMD in Ahrensburg

At the office building of WMD in Ahrensburg, an internationally recognised company for business process optimization, these steel stairs present themselves in a straight and convincing design. The panes of the all-glass railing are hold by the stair...

more >>

Glass railing for steel stairs | Vector Informatik GmbH

Since summer 2016 the new administration building of the Vector Informatik GmbH can be found at the industrial area in Stuttgart-Weilimdorf. Our elegant steel stringer staircase, covering four storeys, presents itsself in the foyer of the company...

more >>

All-glass railing for thermal spa in Bucharest

In the north of Bucharest, in the town of Balotești, the thermal bath Bucharest offers perfect facilities to relax in a quiet ambiance. The advantage of this thermal spa is the exceptional concept: Covering an area of 18.000 m² there are 800.000...

more >>

Staircase | Longchamp in Munich

Since the end of 2014 the fashionable label Longchamp has been located with its own shop in an exclusive shopping mile in Munich together with other luxury brands. The staircase made by MetallArt blends in perfectly in the store's stylish interior....

more >>

All-glass railings | Furniture Store Segmüller

In mid-December 2016 the eighth store of the furnishing retailer Segmüller started in Pulheim near Cologne on a sales floor of 160,000 m². For quite some time the familiy-run business has been prominent for distinctive furnishings which is proven by...

more >>

All-glass railings in architecture

Glass constructions for balustrades

In its early years the construction of glass balustrades was characterized by steel or stainless steel posts constituting the actual railing system. For the balustrade filling the glass panes were inserted  between the posts by point holders. The glass balustrade preventing from falling was prefixed along the slab edge or the stairs.

State-of-the-art all-glass railings however no longer depend on these stainless steel posts. The glass panes can directly be inserted and fixed linearly to the floor profile by means of a specially developed method. The base profiles themselves can be inserted into the flooring conveying the impression that the glass panes freely jut out from the floor. With this type of construction, belonging to category B of the German DIN 18008, the rail load of the balustrade must be statically transferred from the glass panes. The type of glass to be used depends on the static calculation (single-pane safety glass, laminated safety glass). This also applies to the thickness of the glass which is based on the calculation concerning the rail load.

AbP for all-glass railing System MetallArt (only applies to Germany)

General test certificate of the German building authorities

Since 2014/15 building constructions made of glass are subject to DIN 18008 and must comply with the relevant regulations concerning construction and structural design. This norm replaces the previous regulations of the TRAV (technical rules for the use of fall-protection glazing). DIN 18008 is divided into 5 parts. The relevant regulations for glass railings/all-glass railings are stipulated in part 4 "Additional specifications for fall protection glazing". They are valid for balcony glazing and all-glass railings for stairs.

There is an increasing trend to manufacture the individual panes of glass railings and balustrades as large as technically possible.

With our MetallArt system we have the possibility to exceed the standards regarding the dimensions stipulated in DIN 18008 and consequently meet the special requirements of our customers. Due to our specially developed system for all-glass railings in combination with the granted AbP (approval by a general test certificate of the German building authorities) we are able to significantly exceed the dimensions of the indiviual glass panes regarding lenght and width. The AbP applies to all straight, curved and ascending glass railings for balconies, galleries or stairs.The MetallArt railing system finds use for lateral assembly (single-edged slab) as well as for floor assembly (directly onto the floor).

 

Beside the frames made of steel or stainless steel the product range was extended. We are able to offer 3 additional aluminium frames ensuring various design options.

  • floor profile made of stainless steel- grinded or polished
  • floor profile made of steel - primed, zinc-coated or painted
  • floor profile made of aluminium - powder-coated or anodised

AbP for glass railings with filigree stainless steel handrail (onyl applies to Germany)

According to DIN 18008 glass panes clamped below need to be protected by a continuous handrail. A filigree U-channel made of stainless steel meets this regulation. There is a high relevance in modern architecture for solutions waiving any additional elements for glass balustrades. Pure glass is the motto. However, as DIN 18008 requires the edge protection we corresponded to this guideline with the filigree U-channel handrail protecting the panes.

To obtain the General test certificate of the German building authorities (AbP) we cooperated closely with a testing laboratory approved by the German Institute for Structural Engineering (DIBt). So-called pendulum impact tests proving the shock resistance as well as comprehensive structural calculations considering different situations of load bearing and assembly were undertaken.

Laminated Safety Glass (VSG) for glass railings

Laminated safety glass is composited with 2 glass panes stuck together with an PVB film by lamination technology. When laminating there is a clear, elastic and tear-resistant film inserted between 2 panes. The thermal treatment in the autoclave results in a durable bond between the glass panes and the film. In case of glass breakage the panes are hold together by the PVB film. The laminated saftey glass panes can be made of single-pane saftey glass (ESG) or a combination of  single-pane safety glass and floating glass panes. 

All-glass railings for stairs

Functional glasses for stair railings

Steel stairs designed with box-type stringers are ideally suited for glass railings as the glass panes can be directly inserted in the stair stringers. The stringers consequently constitute the base profile for the accomodation of the glass panes. This applies both for straight as well as for curved balustrades. A significant advantage of the MetallArt railing system is the use of the same system profile for the ceiling frame and for the staircase. Especially where the stair construction meets the ceiling frame an homogeneous and uniform appearance can thus be obtained due to this solution. 

In case of cantilevered stairs or folded stairs the glass panes can be fixed directly at the treads by stainless steel point holders.

Mature assembling technology

Custom-developed assembly method

To meet the high standards for working with glass we developed a special assembly method for the MetallArt glass railing system on the basis of our longstanding experience. With a casting compound corresponding with the German inspection standards the glass panes can be cast in the system profile free of constraint forces and, subsequently, sealed (with EPDM rubber or silicone). For the excact alignment there is no need anymore for the glass panes to be wedged by complex clamping.

Pendulum impact test for ZiE (individual approval)

In addition to the general binding regulations for glass railings specified in DIN 18008, it is possible to apply for a General Test Certificate issued by the German Building Authorities (AbP) or for a General Approval by the German Building Authorities (AbZ). These permissions are compulsory for glass railings deviating from DIN 18008. To meet special needs in particular cases it is furthermore possible to apply for an approval on an  individual basis (ZiE). Therefore, a so-called pendulum impact test under conditions identical in construction has to be performed by an institute approved by the DIBt (German Institute fo structural engineering).